TP25D Series High frequency 150W Planar Transformer,PCB Mounting Planar Transformer,Max. thickness 9.12mm
FEATURES:
- Power Rating Up to 150 Watts
- High Efficiency of Over 98%
- High Power Density of 600 Watts Per Cubic Inch
- Footprint 23.5 mm×20.10 mm
- Lower Profile of 9.12 mm
- High Isolation (operational) 1500 Vdc
- High Frequency 200 kHz-700 kHz
- Operating Temperature -40℃ to +125℃
- Very low Leakage Inductance (less than 0.2% for un-gapped cores).
- Cost effective and competitive prices.
- Minimum Electromagnetic Interference (EMI).
- High Creepage and Clearance distances between primary and
- Applicable to all SMPS topologies.
- Various mounting and terminals options (Horizontal, Vertical, Through-holes, SMT, Pins, Flying-cables and more).
- Specially designed heat-dissipating Clasps.
- Low-profile planar transformer
- High-power planar transformer
- High-frequency planar transformer
- PCB planar transformer
- Planar switching power transformer
- Off the shelf SMT planar transformer
APPLICATIONS:
- High performance DC/DC converters.
- High efficiencies up to over 98 percent, high power density of 600 watts per cubic inch DC/DC converters.
- For forward, full-bridge, half-bridge and push-pull DC/DC converters.
- Input voltages between 18V and 75V, and output voltages from 52V down to 1.0V DC/DC converters.
- Telecommunications, industrial control systems,
- Automotive and heavy equipment vehicle systems
TECHNICAL INFORMATION:
- The inductance is measured with both primary windings connected in series Pin(2-5) with Pin(3-4) shorted.
- The leakage inductance is measured in winding Pin(2-4) with all other winding shorted.
- All specifications typical at TA=25℃.
