Planar Transformer for DC/DC and DC/AC Converter,Current ranting up to 73A,Pad size 23.5mm*19.5mm
FEATURES:
- Low-profile planar transformer
- High-power planar transformer
- High-frequency planar transformer
- PCB planar transformer
- Planar switching power transformer
- EE14/EE16/ EE18/EE22/EE32/EE38/EE43/EE64/EE100 planartransformer
- Off the shelf SMT planar transformer
- Power range: up to 3000W
- Very low Leakage Inductance (less than 0.2% for un-gapped cores).
- Cost effective and competitive prices.
- Minimum Electromagnetic Interference (EMI).
- High specific power density (5W-25kW per one component).
- High Creepage and Clearance distances between primary and
- Applicable to all SMPS topologies.
- Various mounting and terminals options (Horizontal, Vertical, Through-holes, SMT, Pins, Flying-cables and more).
- Specially designed heat-dissipating Clasps.
APPLICATIONS:
- High density and high energy efficiency.
- High current DC/DC power supplies high current.
- The main windings inductor serves as an output choke,
- While the auxiliary windings controls, Input current to the PM(TI25S1604).
- Telecommunications, industrial control systems,
- Automotive and heavy equipment vehicle systems
TECHNICAL INFORMATION:
- Inductance of PE 20s1604 measured on Agilient/HP4284 between pins 7 & 11 at 100kHz, 0.1 Vrms.
- The IDC rated is either 85% of the IDC saturation or the IDC heating depending which is lower.
- The IDC saturation is the current which causes the inductance to drop by 15% of its nominal value.
- The IDC heating is the current which causes the temperature of the part to increase by approximately 45℃.
