ACST2019 Series PCB Mount High Precision Current Transformers with Up to 38A Maximum Current Range Available
FEATURES:
- Frequency range: 10kHz to 1MHz
- Designed for use with switching power supplies
- This current sensing transformers are designed to
- Meet UL/CSA/IEC 60950 Reinforced Insulation specification and provide 3 mm creepage/clearance between primary and secondary windings. Winding to winding
- Reinforced insulation per IEC 380
- Epoxy encapsulated construction
- Materials meet requirement of UL94V-0
- Meets IEC950 insulation requirements
- 3750Vrms primary to secondary breakdown voltage
- Current range: up to 38A maximum
- Turns ratio: 1:50, 1:100, 1:200, 1:300 available
- Operating temperature: -40 to 85°C
- High frequency current transformers for SMPS appllications
- High-permeability ferrite current transformers
- Low-profile current transformers
- PCB mount current transformers
- Reliable linear performance transformers
- Many differennt kinds of structure and style for your selection.
- Custom-made are welcome.
NOTE:
- Inductance is for the secondary, measured at 15.75 kHz, 1Vrms.
- Volt-time product is for the secondary, based on 2000 Gauss.
- Terminating resistance (RT) value is based on 1 Volt output
- with 35 Amps flowing through the primary.Varying terminating
- resistance increases or decreases output Voltage/Ampere
- according to the following equation: RT = Vout × Nsec / Iin.
- The maximum useable peak sense current (IPK) depends on
- temperature riseor core saturation, which should be evaluated
- for the operating conditions.
- Ambient temperature range:-40℃ to +85℃.
- Electrical specifications at 25℃.
Notes: Product specifications can be customized
