EE4.6 SMD High frequency Current Sensing Transformers , SMD Current transformers
Feature:
- Turns Ratio: 1:20 1:30 1:50,1:70,1:100,1:150 available
- Sensed current up to 20 Amps
- Designed for use up to 1 MHz and above
- Very low primary resistance
- High frequency current transformers for SMPS appllications
- High-permeability ferrite current transformers
- Low-profile current transformers
- PCB mount current transformers
- Reliable linear performance transformers
Applications:
- Continuous AC current monitoring in switched-mode power supply
- Overload and short-circuit protection
- Current measurement in traction motor and battery management systems in conventional and xEV (EV, HEV, FCEV) vehicles.
- Can also be used in 48 V vehicle electrical systems.
Notes:
- Inductance measured between secondary pins at 100 kHz, 0.1 Vrms, 0 Adc.
- Primary current of 20 A causes less than 25°C temperature rise from 25°C ambient.Higher current causes a greater temperature rise (see Temperature Rise vs Current curve).
- Terminating resistance (RT) value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: RT (Ohms) = Vout × Nsec / Iin.
- 500 Vrms, 1 minute isolation (hipot) winding to winding.
- Many differennt kinds of structure and style for your selection.
- Custom-made are welcome.
Notes: Product specifications can be customized
